Wednesday, January 7, 2015

Snare Drum Wires FAQ, Part 1: When do you need to replace them with new ones?

By Victor Salazar


One of the most common questions that I'm asked each day at Vic's is "how do I know when it's time to change my snare wires?"



Your wires may need to be replaced even though they are not broken or missing. To see if replacement is necessary, try this simple test:

Turn your snare drum over and release the snare wires using the throw-off. If your wires no longer lie completely flat in a straight line that is spaced equidistantly, then it is time to change your wires.



Snare wires should look totally like a brand new set that are still in packaging when there is zero tension being applied to them. Frequently, snare drum wires get twisted and bent over time and it is difficult to notice this when they are snuggly pressed up against the bottom snare side head and fully engaged. In this position, they may appear to be damage-free, but in reality, they may need to be replaced. If your snare wires have any of the signs of overuse that I mentioned earlier, then you are probably not getting full and even contact with every strand of wire when playing. This may cause your snare response to be lacking or overly sensitive with extra unwanted snare buzz.

Take some time to periodically check the condition of your snare wires and replace them when necessary. Snare wires are available from a variety of manufacturers like Puresound, Gibraltar, Drum Workshop, PDP, Tama, and Pearl. Although they are a fairly inexpensive accessory, snare drum wires are a vital component and have an enormous impact on the sound of your snare drum.

I hope this simple test helps you to easily recognize when your snare drum wires need to be replaced. If you have any questions or need specific advice regarding your snare wires, feel free to reach out. I am always here to help!






About the Author:



No comments:

Post a Comment