Thursday, November 17, 2016

Simple Steps To Follow In Doing Piano Repair

By John Parker


The labor for a piano repair can be very extensive but however, doing this would be very much easy if you acquire the needed supplies and tools, thus, you may do it by yourself. For some types which are in valuable antiques, in Atlanta, GA, professionals are recommended to do the job since they have better knowledge and expertise. Owning a piano and trying to restore is fun.

But before you start doing your own repair, you first have to know the value or worth of the instrument by contacting a professional. This piano repair Atlanta often needs and consumes higher budgets especially if you do not wish to ruin it because of its being antique. The musical and the structural condition of is checked by the professional. The age of instrument may be determined by checking the serial number and knowing who is the manufacturer.

Also, you may observe if there are any ornate inlays and ornate carvings and other designs that are unusual. Then discuss all of the conditions that you have found out with your trusted dealer. The dealer will then tell you some information on the methods to be used in the restoration.

After all the examinations, start by disassembling the piano. In this step, all hard wares are required to be removed, but make sure that all the parts are labeled so you can easily reassemble it after. Take note of the processes during the disassembling since the project would take a longer time to be completed. Taking photographs is suggested as well before and after removing.

The next method is removing the varnish. Use a paint stripper for a furniture when removing an old varnish. After the varnish has been removed, use a fine steel wool, an old cloth that is lint free, and a paint thinner when cleaning the wood. Then after, use a sandpaper to sand the clean wood. Use only a light touch when using the sandpaper. After being sanded, get a tack cloth to pick up the dust and debris.

When repairing the dings and the dents, use the wood filler. A lacquer finish coating is suggested to be applied for the prevention of the stain of causing an uneven color on the wood. There are also some other types of finishes and these can be applied to most types of a wood stain except for the polyurethane varnish.

Apply now a first coating of the stain with using a lint free rag or foam brush. Small amounts only are needed to be applied at first on the areas. Avoid some streaks by wiping the excess. If you desire for it on having a color that is deeper, apply the coating several until you achieve your desired color. Make sure to dry out previous coatings before applying another.

The start to apply the coat for its finishing. One good suggestion is to use polyurethane. This would help seal the stains and would protect the instrument from moisture damages. After adding then polyurethane, sand it. The removal of dust particles is done through using tack cloth. Apply the finishing coat again.

Lastly is to reassemble your piano. Make sure that before reassembling, all parts have been dried already. Test it by touching, if it is still a bit sticky, it is not dry yet. A carpet should be placed on the floor to avoid some scratches. Start reassembling by referring on your photographs and notes.




About the Author:



No comments:

Post a Comment